Autonomic Disorders Certification Exam Prep
Free practice questions

Free AD Practice Questions

10 exam-style questions with answers and explanations, straight from our 1,030-question bank. Tap an answer to check yourself. When you're ready, take the scored version in the free practice test.

Start the free practice test → ★★★★★4.9/5 from 2,400+ candidates · No signup

The AD exam has 200 questions and runs 4 hours.

These 10 free AD questions are organized by exam domain, so you can see how each part of the Autonomic Disorders Certification blueprint is tested. Reveal the answer and explanation under each question.

Domain 1: Basic Science 25% of exam

Question 1

During a field-measurement visit, a drafter discovers that one end of a temporary guardrail beside an open stairwell is unsecured. The opening is not otherwise protected, and the drafter can move away along a clear route. What is the appropriate immediate action?

Show answer & explanation

Correct answer: C - Withdraw from the edge and notify the site supervisor.

Domain 3: Clinical Autonomic Disorders 25% of exam

Question 2

Field dimensions for a rectangular cabinet are 48 in wide across its front, 18 in deep, and 84 in high. A drafter is constructing front, top, and right-side orthographic views at the same scale. The outer boundary of the right-side view should represent:

Show answer & explanation

Correct answer: A - 18 in horizontally and 84 in vertically

More AD practice questions

Question 3

A wood-framing elevation shows a header over a door, full-height king studs beside the opening, and cripple studs above the header. The approved detail requires the header ends to bear on vertical wood members extending to the bottom plate; those members are missing from the elevation. What should be added?

Show answer & explanation

Correct answer: C - Jack studs beneath header ends, extending to the bottom plate

Question 4

A roofing takeoff covers both slopes of a symmetrical gable roof. Its horizontal projection measures 24 ft by 36 ft to the roof edges, including all overhangs. The ridge parallels the 36-ft side, and each roof plane rises 5 in for every 12 in of horizontal run. There are no openings. Before adding waste, what sloping surface area belongs in the takeoff?

Show answer & explanation

Correct answer: C - 936 sq ft

Question 5

A drafter is annotating existing plumbing after a survey. A seldom-used floor drain has a dry trap, and a reported sewer-gas odor disappears when water is added. Wastewater otherwise drains freely. Which function has the added water restored?

Show answer & explanation

Correct answer: B - Water has restored the trap's barrier against sewer-gas entry.

Question 6

The drawing register identifies A202 Revision 3 as the current authorized construction issue. A Revision 4 working file has a later modification date but is marked 'Coordination only.' The contractor, who has Revision 2, requests the current construction sheet. Under a procedure allowing only authorized construction issues to be sent for site use, the drafter should:

Show answer & explanation

Correct answer: D - Issue Revision 3 with a transmittal identifying it as the current sheet.

Question 7

A new manual hinged doorway on an accessible route is subject to the 2010 ADA Standards, with no applicable exception. The opening is 8 in deep. With the leaf open 90 degrees, the unobstructed distance from the door face to the opposite stop is 33 in; there are no projecting obstructions. Reviewing only the clear-opening-width requirement, what is the correct finding?

Show answer & explanation

Correct answer: C - It meets the requirement; the measured clear opening exceeds 32 in.

Question 8

Each cabinet centerline in a millwork layout must be set out independently from Grid B. The draft locates the first cabinet from Grid B, then chains the remaining centerlines from one another. Which dimensioning revision prevents a setting-out error at the first cabinet from being carried through the rest of the row?

Show answer & explanation

Correct answer: A - Dimension each cabinet centerline independently from Grid B.

Question 9

A proposed surface-drainage route runs from elevation 101.20 ft beside a building to 100.60 ft at a swale low point, then to an outlet at 100.90 ft. All elevations use the same datum, and grades are straight between these points. There is no other outlet or pumped drainage. Which review finding is supported by this profile?

Show answer & explanation

Correct answer: D - The low point lacks a continuously downhill surface path to the outlet.

Question 10

A flooring order covers a 12-ft by 20-ft lobby and a separate 8-ft by 10-ft alcove. A fixed cabinet occupies a 2-ft by 10-ft footprint within the alcove; the takeoff excludes flooring beneath it. Purchasing requires an additional 10% of the net floor area for cutting waste. Each carton covers 24 sq ft. What is the minimum number of whole cartons to order?

Show answer & explanation

Correct answer: B - 14 cartons

The rest of the AD blueprint

The AD exam also covers these domains. Drill them in the full free practice test:

That's 10 of 1,030

The full bank has 1,020 more AD questions with explanations.

Continue in the free practice test →

View plans